dmesg - MSI NVIDIA GeForce GTX 1650 Ti
microcode: microcode updated early to revision 0xe0, date = 2020-07-08
Linux version 5.8.0-48-generic (buildd@lgw01-amd64-008) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #54~20.04.1-Ubuntu SMP Sat Mar 20 13:40:25 UTC 2021 (Ubuntu 5.8.0-48.54~20.04.1-generic 5.8.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: xstate_offset[9]: 960, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000096260fff] usable
BIOS-e820: [mem 0x0000000096261000-0x0000000097e68fff] reserved
BIOS-e820: [mem 0x0000000097e69000-0x0000000097f98fff] ACPI data
BIOS-e820: [mem 0x0000000097f99000-0x0000000098471fff] ACPI NVS
BIOS-e820: [mem 0x0000000098472000-0x0000000099c4dfff] reserved
BIOS-e820: [mem 0x0000000099c4e000-0x0000000099c4efff] usable
BIOS-e820: [mem 0x0000000099c4f000-0x000000009f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000105e7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.2.0 present.
DMI: Micro-Star International Co., Ltd. GL65 Leopard 10SCSR/MS-16U8, BIOS E16U8IMS.105 05/28/2020
tsc: Detected 2600.000 MHz processor
tsc: Detected 2599.992 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x105e800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 009C000000 mask 7FFC000000 uncachable
3 base 009B000000 mask 7FFF000000 uncachable
4 base 2000000000 mask 6000000000 uncachable
5 base 4000000000 mask 4000000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x99c4f max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce30-0x000fce3f]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
RAMDISK: [mem 0x2d5cd000-0x32addfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 MSI_NB)
ACPI: XSDT 0x000000009840D728 0000C4 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013)
ACPI: FACP 0x0000000097F92000 000114 (v06 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: DSDT 0x0000000097F55000 03C0ED (v02 MSI_NB MEGABOOK 01072009 INTL 20160527)
ACPI: FACS 0x0000000098471000 000040
ACPI: MCFG 0x0000000097F96000 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000097F93000 002087 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: FIDT 0x0000000097F54000 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: ECDT 0x0000000097F53000 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
ACPI: SLIC 0x0000000097F98000 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013)
ACPI: SSDT 0x0000000097F4F000 0031DA (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x0000000097F4C000 00299F (v02 Intel PegSsdt 00001000 INTL 20160527)
ACPI: HPET 0x0000000097F97000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013)
ACPI: SSDT 0x0000000097F4B000 000B89 (v02 INTEL xh_cfhd4 00000000 INTL 20160527)
ACPI: NHLT 0x0000000097F4A000 00002D (v00 MSI_NB MEGABOOK 01072009 AMI 01000013)
ACPI: LPIT 0x0000000097F49000 000094 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013)
ACPI: DBGP 0x0000000097F47000 000034 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013)
ACPI: DBG2 0x0000000097F46000 000054 (v00 MSI_NB MEGABOOK 01072009 AMI 01000013)
ACPI: SSDT 0x0000000097F44000 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
ACPI: DMAR 0x0000000097F45000 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x0000000097F40000 002561 (v01 OptRf1 Opt1Tabl 00001000 INTL 20160527)
ACPI: WSMT 0x0000000097F48000 000028 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: APIC 0x0000000097F3F000 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FPDT 0x0000000097F3E000 000044 (v01 MSI_NB CML 01072009 AMI 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000105e7fffff]
NODE_DATA(0) allocated [mem 0x105e7d6000-0x105e7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000105e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000096260fff]
node 0: [mem 0x0000000099c4e000-0x0000000099c4efff]
node 0: [mem 0x0000000100000000-0x000000105e7fffff]
Zeroed struct page in unavailable ranges: 46594 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000105e7fffff]
On node 0 totalpages: 16730622
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9546 pages used for memmap
DMA32 zone: 610914 pages, LIFO batch:63
Normal zone: 251808 pages used for memmap
Normal zone: 16115712 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x96261000-0x97e68fff]
PM: hibernation: Registered nosave memory: [mem 0x97e69000-0x97f98fff]
PM: hibernation: Registered nosave memory: [mem 0x97f99000-0x98471fff]
PM: hibernation: Registered nosave memory: [mem 0x98472000-0x99c4dfff]
PM: hibernation: Registered nosave memory: [mem 0x99c4f000-0x9f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x9f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 16469183
Policy zone: Normal
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 65586732K/66922488K available (14339K kernel code, 2537K rwdata, 5436K rodata, 2644K init, 4916K bss, 1335756K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
ftrace: allocating 46224 entries in 181 pages
ftrace: allocated 181 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000098999000 end: 0x00000098be2fff
DMAR: RMRR base: 0x0000009b000000 end: 0x0000009f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=10399968)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-10750H CPU @ 2.60GHz (family: 0x6, model: 0xa5, stepping: 0x2)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (62399.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x97f99000-0x98471fff] (5083136 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 06:42:02, date: 2021-04-09
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1617950522.044:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF950F56946800 0000FC (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF950F569AB400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF950F56B15000 000137 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF950F560B7000 000BEA (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF950F569AF000 0003D7 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF950F560B4000 000D22 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF950F569AC800 0003CA (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:9b54] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:9bc4] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xc4423000-0xc4423fff 64bit]
pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc4400000-0xc440ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xc441a000-0xc441bfff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xc4422000-0xc4422fff 64bit]
pci 0000:00:14.3: [8086:06f0] type 00 class 0x028000
pci 0000:00:14.3: reg 0x10: [mem 0xc4414000-0xc4417fff 64bit]
pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:06e8] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.2: [8086:06ea] type 00 class 0x0c8000
pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc441f000-0xc441ffff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:06d3] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xc4418000-0xc4419fff]
pci 0000:00:17.0: reg 0x14: [mem 0xc441e000-0xc441e0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097]
pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xc441d000-0xc441d7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:06b0] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.7: [8086:06b7] type 01 class 0x060400
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1d.7: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:068d] type 00 class 0x060100
pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xc4410000-0xc4413fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xc4100000-0xc41fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xc441c000-0xc441c0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10de:1f95] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xc3000000-0xc3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xc4000000-0xc407ffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc3000000-0xc40fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:02:00.0: [15b7:5009] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xc4300000-0xc4303fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xc4304000-0xc43040ff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0xc4300000-0xc43fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x18: [mem 0xc4204000-0xc4204fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xc4200000-0xc4203fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.7: PCI bridge to [bus 03]
pci 0000:00:1d.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.7: bridge window [mem 0xc4200000-0xc42fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x13
ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x96261000-0x97ffffff]
e820: reserve RAM buffer [mem 0x99c4f000-0x9bffffff]
e820: reserve RAM buffer [mem 0x105e800000-0x105fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:06: [io 0x1800-0x18fe] could not be reserved
system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x2000-0x20fe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfe038000-0xfe038fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:15.0: BAR 0: assigned [mem 0x9f800000-0x9f800fff 64bit]
pci 0000:00:15.2: BAR 0: assigned [mem 0x9f801000-0x9f801fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc3000000-0xc40fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0xc4300000-0xc43fffff]
pci 0000:00:1d.7: PCI bridge to [bus 03]
pci 0000:00:1d.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.7: bridge window [mem 0xc4200000-0xc42fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xc3000000-0xc40fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xc4300000-0xc43fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xc4200000-0xc42fffff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 87108K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x92261000-0x96261000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 122
pcieport 0000:00:1d.0: PME: Signaling with IRQ 123
pcieport 0000:00:1d.0: AER: enabled with IRQ 123
pcieport 0000:00:1d.0: DPC: enabled with IRQ 123
pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.7: PME: Signaling with IRQ 124
pcieport 0000:00:1d.7: AER: enabled with IRQ 124
pcieport 0000:00:1d.7: DPC: enabled with IRQ 124
pcieport 0000:00:1d.7: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xa0000000, mapped to 0x000000004a491490, using 8128k, total 8128k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: \_SB_.PR00: Found 3 idle states
intel_idle: v0.5.1 model 0xA5
intel_idle: Local APIC timer is reliable in all C-states
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (58 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2021-04-09T06:42:02 UTC (1617950522)
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0xa0652, pf=0x20, revision=0xe0
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (586810278, 8405479)->(651383934, -56168177)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 76eda9298d4765a62ac93bc1887b5735875ee8fe'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 1:980:720
block loop0: hash matches
RAS: Correctable Errors collector initialized.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
battery: ACPI: Battery Slot [BAT1] (battery present)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2644K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 708K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.8.0-48-generic
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
hid: raw HID events driver (C) Jiri Kosina
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-48-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
nvme nvme0: pci function 0000:02:00.0
cryptd: max_cpu_qlen set to 1000
ahci 0000:00:17.0: version 3.0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x30 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
i2c i2c-0: 2/2 memory slots populated (from DMI)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
i2c i2c-0: Successfully instantiated SPD at 0x50
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-48-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
nvme nvme0: allocated 32 MiB host memory buffer.
nvme nvme0: 12/0/0 default/read/poll queues
libphy: r8169: probed
r8169 0000:03:00.0 eth0: RTL8168h/8111h, 2c:f0:5d:65:8a:53, XID 541, IRQ 140
r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:03:00.0 enp3s0: renamed from eth0
intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
idma64 idma64.0: Found Intel integrated DMA 64-bit
nvme0n1: p1 p2 p3 p4
checking generic (a0000000 7f0000) vs hw (c2000000 1000000)
checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
fb0: switching to inteldrmfb from VESA VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
idma64 idma64.1: Found Intel integrated DMA 64-bit
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
i2c_hid i2c-CUST0001:00: supply vdd not found, using dummy regulator
i2c_hid i2c-CUST0001:00: supply vddl not found, using dummy regulator
[drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input8
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xc441d000 port 0xc441d300 irq 127
ata6: SATA max UDMA/133 abar m2048@0xc441d000 port 0xc441d380 irq 127
input: CUST0001:00 04F3:30FA Mouse as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-6/i2c-CUST0001:00/0018:04F3:30FA.0001/input/input9
input: CUST0001:00 04F3:30FA Touchpad as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-6/i2c-CUST0001:00/0018:04F3:30FA.0001/input/input11
hid-generic 0018:04F3:30FA.0001: input,hidraw0: I2C HID v1.00 Mouse [CUST0001:00 04F3:30FA] on i2c-CUST0001:00
usb 1-2: new high-speed USB device number 2 using xhci_hcd
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4f4001)
psmouse serio1: elantech: Synaptics capabilities query result 0x01, 0x17, 0x0d.
psmouse serio1: elantech: Elan sample query result 00, 43, 86
psmouse serio1: elantech: Elan ic body: 0x10, current fw version: 0x2
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
usb 1-2: New USB device found, idVendor=1bcf, idProduct=28c4, bcdDevice= 5.30
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: FHD Camera Microphone
usb 1-2: Manufacturer: SunplusIT Inc
usb 1-2: SerialNumber: 01.00.00
usb 1-3: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2591.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb5c6a11, max_idle_ns: 440795249002 ns
clocksource: Switched to clocksource tsc
usb 1-3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB 2.0 Hub
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-7: new high-speed USB device number 4 using xhci_hcd
usb 1-7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: USB2.0-CRW
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
usb 1-3.1: new high-speed USB device number 5 using xhci_hcd
usb 1-3.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3.1: Product: USB 2.0 Hub
hub 1-3.1:1.0: USB hub found
hub 1-3.1:1.0: 4 ports detected
usb 1-13: new high-speed USB device number 6 using xhci_hcd
usb 1-13: New USB device found, idVendor=04f2, idProduct=b695, bcdDevice=32.75
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: HD Webcam
usb 1-13: Manufacturer: SunplusIT Inc
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
usb 1-3.2: new low-speed USB device number 7 using xhci_hcd
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Libvirt guests shutdown.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Set the console keyboard layout.
usb 1-3.2: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: Product: USB Optical Mouse
usb 1-3.2: Manufacturer: PixArt
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Started Journal Service.
systemd-journald[407]: Received client request to flush runtime journal.
soc_button_array ACPI0011:00: Unknown button index 0 upage 01 usage c6, ignoring
usb 1-3.1.1: new full-speed USB device number 8 using xhci_hcd
ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
input: gpio-keys as /devices/platform/ACPI0011:00/gpio-keys.3.auto/input/input12
input: MSI WMI hotkeys as /devices/virtual/input/input13
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Intel(R) Wireless WiFi driver for Linux
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-56.ucode failed with error -2
iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 65.3.35.22
iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:00:14.3: Found debug configuration: 0
iwlwifi 0000:00:14.3: loaded firmware version 55.d9698065.0 QuZ-a0-hr-b0-55.ucode op_mode iwlmvm
iwlwifi 0000:00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
usb 1-3.1.1: New USB device found, idVendor=0d8c, idProduct=0005, bcdDevice= 1.00
usb 1-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.1.1: Product: Blue Snowball
usb 1-3.1.1: Manufacturer: BLUE MICROPHONE
usb 1-3.1.1: SerialNumber: 201210
nvidia-nvlink: Nvlink Core is being initialized, major device number 234
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x354
input: CUST0001:00 04F3:30FA Mouse as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-6/i2c-CUST0001:00/0018:04F3:30FA.0001/input/input14
input: CUST0001:00 04F3:30FA Touchpad as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-6/i2c-CUST0001:00/0018:04F3:30FA.0001/input/input16
hid-multitouch 0018:04F3:30FA.0001: input,hidraw0: I2C HID v1.00 Mouse [CUST0001:00 04F3:30FA] on i2c-CUST0001:00
usb 1-14: new full-speed USB device number 9 using xhci_hcd
iwlwifi 0000:00:14.3: base HW address: f8:ac:65:a0:e6:8c
thermal thermal_zone3: failed to read out thermal zone (-61)
iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
Adding 1953788k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:1953788k SSFS
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1617950525.629:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=662 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=670 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=667 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=665 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=661 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=661 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1617950525.629:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=660 comm="apparmor_parser"
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
usb 1-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:093A:2510.0002/input/input24
hid-generic 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3.2/input0
hid-generic 0003:0D8C:0005.0003: No inputs registered, leaving
hid-generic 0003:0D8C:0005.0003: hidraw2: USB HID v1.00 Device [BLUE MICROPHONE Blue Snowball] on usb-0000:00:14.0-3.1.1/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
Bluetooth: hci0: Device revision is 2
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
usb 1-2: 3:1: cannot get freq at ep 0x86
usb 1-2: 3:2: cannot set freq 11025 to ep 0x86
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 1-3.1.4: new low-speed USB device number 10 using xhci_hcd
usb 1-2: 3:3: cannot set freq 16000 to ep 0x86
usb 1-2: 3:4: cannot get freq at ep 0x86
fbcon: Taking over console
usb 1-2: 3:5: cannot set freq 24000 to ep 0x86
Console: switching to colour frame buffer device 240x67
Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
usb 1-2: 3:6: cannot set freq 32000 to ep 0x86
usb 1-2: 3:7: cannot set freq 44100 to ep 0x86
usb 1-3.1.4: New USB device found, idVendor=1c4f, idProduct=0026, bcdDevice= 1.10
usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.1.4: Product: USB Keyboard
usb 1-3.1.4: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4:1.0/0003:1C4F:0026.0004/input/input26
usb 1-2: 3:8: cannot get freq at ep 0x86
hid-generic 0003:1C4F:0026.0004: input,hidraw3: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3.1.4/input0
input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4:1.1/0003:1C4F:0026.0005/input/input27
r8169 0000:03:00.0 enp3s0: Link is Down
usb 1-2: Warning! Unlikely big volume range (=3896), cval->res is probably wrong.
usb 1-2: [7] FU [Mic Capture Volume] ch = 1, val = 200/4096/1
uvcvideo: Found UVC 1.00 device FHD Camera Microphone (1bcf:28c4)
usbcore: registered new interface driver snd-usb-audio
input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4:1.1/0003:1C4F:0026.0005/input/input28
hid-generic 0003:1C4F:0026.0005: input,hidraw4: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3.1.4/input1
input: FHD Camera Microphone: FHD Came as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input29
uvcvideo: Found UVC 1.00 device HD Webcam (04f2:b695)
input: HD Webcam: HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/input/input30
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
bpfilter: Loaded bpfilter_umh pid 1103
Started bpfilter
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 460.39 Thu Jan 21 21:54:06 UTC 2021
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.39 Thu Jan 21 21:49:04 UTC 2021
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
nvidia-uvm: Loaded the UVM driver, major device number 509.
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1504331 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 14672 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Firmware revision 0.0 build 121 week 36 2020
NET: Registered protocol family 38
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2591999048 Hz
vboxdrv: Successfully loaded version 6.1.16_Ubuntu (interface 0x00300000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
wlo1: authenticate with b6:fb:e4:75:10:89
wlo1: send auth to b6:fb:e4:75:10:89 (try 1/3)
wlo1: authenticated
wlo1: associate with b6:fb:e4:75:10:89 (try 1/3)
wlo1: RX AssocResp from b6:fb:e4:75:10:89 (capab=0x411 status=0 aid=2)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
process 'cyt/geekbench/Geekbench-5.4.0-Linux/geekbench_x86_64' started with executable stack
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)
nvidia-modeset: WARNING: GPU:0: Correcting number of heads for current head configuration (0x00)